Zero VOC, Clear, Aliphatic Polyaspartic Coating

Download Excel-A-Spartic 87 data sheet

PRODUCT DESCRIPTION:

Excel-A-Spartic 87 is the next generation in two component, fast drying, aliphatic polyaspartic ester coatings. While other aliphatic urethanes can only be applied between 4 and 6 mils, Excel-A-Spartic 87 can be applied in a single coat up to 14 mils. Excel-A-Spartic 87 features good abrasion and chemical resistance, and a cure time of two to four hours. It can be installed in unusually high or low temperatures. Excel-A-Spartic 87 is the ideal product when low odor, fast turnaround and a non-yellowing system are essential.

ADVANTAGES:

  • • Low odor
  • • Abrasion resistant
  • • Non-yellowing
  • • Chemical resistance
  • • Can be Installed over Wood, Concrete and Metal
  • • 0 VOC
  • • Easy mixing ratio (1:1)
  • • Fast drying (2-4 hour cure)
  • • Impact Resistant

APPLICATIONS:

  • • Pharmaceutical Floors
  • • Food Prep/Kitchens
  • • Garage Floors
  • • Restrooms
  • • Manufacturing Plants
  • • Aisle Ways
  • • Auto Showrooms
  • • Schools
  • • Laboratories
  • • Basements
  • • Kennels
  • • Veterinary Facilities
  • • Locker Rooms
  • • Health Care Facilities
  • • Loading Docks
  • • Car Wash Facilities

COLORS:

  • • Pacific Gray
  • • Sidewalk Gray
  • • Rocky Gray
  • • Monterey Sand
  • • Desert Tan
  • • Ash Brown

PACKAGING:

Excel-A-Spartic 87 is available in two different kit sizes:

Part A Part B
2 Gallon Kit 1 gal. 1 gal.
10 Gallon Kit 5 gal. 5 gal.

PHYSICAL PROPERTIES (LIQUID):

PROPERTY TYPICAL VALUE
Appearance Clear Liquid
Total Solids (% by Weight) 85% ± 2
Total Solids (% by Volume) 87.5% ± 2
Surface Tension, Dynes / cm 40
Viscosity (Brookfield LVF) , cps @ 25° C 400 ± 100
Density (lbs. / gallon) 9.4
Specific Gravity (Coating) 1.13
Flash Point (Pensky-Martens closed cup) <110° F
Freeze / Thaw Stability N/A
Thermal Stability (28 days @ 120° F) No Effect
Mechanical Stability Good
VOC Content (Clear) 0 gm / liter
VOC Content (Colored) (Varies with Colors) 5—20 gm / liter

FILM PROPERTIES:

PHYSICAL PERFORMANCE PROPERTIES (TYPICAL) OF DRY FILM

All tests were conducted on 4 to 8 mil films, which were air-dried for seven days at room temperature.

PROPERTY TYPICAL VALUE
Tensile Strength, psi 6,500
Elongation 26%
Hardness (Pencil / Sword) 2H / 70
Taber Abrasion (mg loss per 1,000 cycles, CS-17 wheel, 1,000 gm load) 50
Impact Resistance (Direct / Reverse) 140 lbs. / 140 lbs.
Crosshatch Adhesion (Untreated Cold Rolled Steel / Untreated Aluminum) 100% / 100%

QUV WEATHEROMETER:

(ALCLAD ALUMINUM 1,000 HRS.)

PROPERTY TYPICAL VALUE
Oxidation No Effect
Loss of Gloss Slight
Blistering No Effect
Yellowing No Effect