MATERIAL SAFETY DATA SHEET
RETARDER/EXTENDER
SECTION 1 - COMPANY & PRODUCT
IDENTIFICATION
Manufacturer's Name Excellent Coatings, Inc. Prep Date: 07/16/02
Address 1285
Distribution Way
Vista,
CA 92083
(800)
473-3817
Product Class:
Extender/Retarder
Trade Name: Citric Acid Anhydrous
H.M.I.S. Codes: H F
R P
0
0 0 0
SECTION 2 - HAZARDOUS
INGREDIENTS
Weight Occupt Exposure Limits Vapor Pressure
Ingredient
C.A.S.# Percent OSHA PEL
ACGIH TLV mm Hg &
Temp.F
---------------------------------------------------------------------------------------------------------------------------
Citric Acid 77-92-9 60-100ppm n/a
n/a n/a
n/a
*Indicates toxic
chemical(s) subject to reporting requirements of Section 313 of Title III and
of 40 CFR 372.
SECTION 3 - PHYSICAL
DATA
Boiling Range (Deg.
F): n/a Vapor Density: n/a
Evaporation
Rate: n/a
Percent Volatile By
Volume: n/a Weight Per Gallon
(lbs.): 6.5
SECTION 4 - FIRE &
EXPLOSION HAZARD DATA
Flash Point (Deg.
F): n/a Lower
Explosive Limit: n/a
Extinguishing
Media: Not flammable.
OSHA Flammability
Classification: n/a
Special Firefighting
Procedures: n/a
SECTION 5 - HAZARD
DATA
THIS PRODUCT IS NON-COMBUSTIBLE.
Effects Of Overexposure:
Eyes: Irritation, redness and pain.
Skin: Dust may cause redness and irritation.
Ingestion: May cause gastrointestinal irritation.
Inhalation:
Dust is irritating; may cause sore throat, coughing and difficulty
breathing.
Emergency & First Aid Procedures:
Eyes: Flush with water for 20 minutes.
Skin: Remove contaminated clothing, wash skin with
soap and water.
Ingestion:
If alert and not convulsing, drink 1/2 to 1
glass of water to dilute. If spontaneous
vomiting occurs, have victim lean forward with head down to avoid breathing in
vomitus; rinse mouth and administer more water.
IMMEDIATELY contact Poison Control Center. Vomiting may need to be
induced as directed under care of physician or Poison Control Center. Transport victim immediately to emergency
facility.
Inhalation: Move to fresh air, aid breathing if
necessary.
In all cases, consult a physician for best treatment.
Chemical listed as
carcinogen or potential carcinogen:
NTP: No
IARC: No OSHA: No
SECTION 6 - REACTIVITY
DATA
Stability: Product
Stable
Conditions to
Avoid: Incompatible materials, dust
generation, moisture, exposure to moist air or water.
Incompatibility
(Materials to Avoid): Copper, zinc, aluminum and their alloys due to corrosion.
Hazardous
Decomposition Products: Carbon monoxide
and carbon dioxide.
Hazardous
Polymerization: Will Not Occur
SECTION 7 - SPILL & LEAK PROCEDURES
Steps To Be Taken In Case Material Is Released Or
Spilled: Sweep or vacuum spilled
material. Avoid over-handling, which
could increase or concentrate respirable dust.
Waste Disposal
Method: Dispose of in accordance with
local, state and federal regulations.
SECTION 8 - SPECIAL PROTECTION
INFORMATION
Respiratory
Protection: Use a NIOSH/MSHA jointly
approved respirator
Ventilation: Use mechanical ventilation
Protective
Gloves: Neoprene or rubber
Eye Protection: Chemical splash goggles
Other Protective
Equipment: Protective clothing, barrier
cream, eye bath, safety shower
SECTION 9 - SPECIAL
PRECAUTIONS
Precautions To Be
Taken In Handling & Storing: Store
in cool, dry area. Store protected from
moisture. Avoid contact with incompatible
materials. Avoid open flame.
Other
Precautions: Minimize contact. Avoid breathing vapors. Practice good industrial hygiene and safe
working practices.