Section 1 - Chemical Product and Company Identification                      

Product/Chemical Name: EXCEL-COAT GREEN LINE V

General Use: WATERPROOFING MEMBRANE       

Manufacturer: EXCELLENT COATINGS INC., 1285 DISTRIBUTION WAY, VISTA, CA  92083-8817 /  (760) 598-1234 / (760) 598-1131 FAX

Section 2 - Composition / Information on Ingredients

Ingredients                                                         CAS #                            Maximum                                      Exposure                                  

Modified Styrene-Butadiend Polymer            Propietary                      51.0%                                             None Assigned

Water                                                                   7732-18-5                       51.0%                                             None Assigned

Section 3 - Physical and Chemical Properties

Boiling Point:  212 Deg. F.

Volatile %:  49-51

Evap. Rate:  Slower than n-Butyl Acetate

Appearance:  White liquid, bland odor

 

Vapor Density:  Heavier than Air.

Specific Grav:  1.01

Section 4 - Fire and Explosion Hazard Data

 

Flammability Class:  N/A                Flash Point:  N/A                LEL:  N/A

Extinguishing Media:  Water, carbon dioxide, or dry chemical

Special Firefighting Procedures:  Firefighters and others exposed to vapors or products of combustion should wear self-contained breathing apparatus.

Unusual Fire & Explosion Hazards:  None Known.

 

Section 5 - Health Hazard Data

Permissible Exposure Level:  There is no OSHA PEL or ACGIH TLV established for modified butadiene styrene polymer.

Effects of Overexposure: 

Skin:  This material may cause skin irritation or rash upon prolonged or repeated contact.

Inhalation:  Excessive exposure to vapors or spray mists can cause irritation of eyes, nose and throat.

Eyes:  This material may be an eye irritant.

First Aid: 

Skin:  Wash with soap and water immediately.

Eyes:  Flush with large quantities of water for 15 minutes and seek medical attention.

Primary Route(s) of Entry:  Inhalation of vapors (especially if sprayed or heated).

Toxicological Information:  This product does not contain 0.1% or more of any substance listed as a carcinogen by NTP, IARC or OSHA

Section 6 - Reactivity Data

Stability:  q  Unstable                x Stable

Hazardous Polymerization:             q May Occur            x Will Not Occur

Incompatibility:  None Known

Conditions to Avoid:  Keep from freezing.

Hazardous Decomposition Products:  Under severe thermal degradation - low-molecular-weight organic compounds will be formed.

Section 7 - Spill or Leak Procedures

Steps to be Taken in Case Material is Released or Spilled:  Clean up with water before allow to dry.  Sodium chloride can be sprinkled on the spill, which may coagulate the latex and facilitate cleaning with water.  Place coagulated wasted in a closed container.  Wear protective equipment during cleanup.

Waste Disposal Method:  At this time, this material or its containers would not be considered hazardous wasted as defined under the federal RCRA regulations (40 CFR 261 if discarded.  Care should be taken to ensure that the material or its containers are disposed of in an approved facility in accordance with current federal, state, and local regulations.

 

For further information, contact your state or local solid waste agency or the United States Environmental Agency's RCRA hotline (800) 424-9346 or (202) 382-3000.

Section 8 - Special Protection Information

Respiratory Protection:  Not generally required during normal use and handling. 

Ventilation:  General ventilation is recommended during normal use.  Local ventilation may be required during certain operations to prevent inhalation of vapors.

Protective Gloves:  Chemical-resistant nitril, neoprene or rubber gloves required.

Eye Protection:  Wear face shield or chemical goggles.

Other Protective Equipment:  Wear protective clothing to prevent skin contact.  Eye wash station and safety shower should be available.

 

Section 9 - Special Precautions

Precautions to be taken in Handling and Storing:  Avoid prolonged or repeated inhalation of heated vapors or spray mists.  Keep away from heat or open flame.  Avoid prolonged or repeated skin contact.

Other Precautions:   Consult product bulletin prior to using this material.

 

Section 10 - Supplemental Information

Regulatory Information:  None

SARA & WHMIS Hazard Classifications:  This material is not categorized as a hazordoud substance as defined by SARA Title III regulations (40 CFR 370).

Canadian WHMIS Classification:  Not WHMIS Hazardous

SARA Section 313 Listed Ingredients:   This material does not contain any substance which is subject to the reporting requirements of 40 CFR 372

DOT Proper Shipping Name:  Not regulation by DOT-HMR