SECTION
1 - CHEMICAL PRODUCT AND
COMPANY
IDENTIFICATION
Product Name: EXCEL-COAT Acrylic Lacquer Sealer
General Use: WATERPROOFING MEMBRANE
Manufacturer: EXCELLENT COATINGS INC
1285 DISTRIBUTION WAY, VISTA, CA92083-8817 * (760) 598-1234 * (760) 598-1131 FAX
SECTION 2 -
COMPOSITION/INFORMATION ON INGREDIENTS
Exposure Limits (TWAs) in Air
|
Chemical Name |
CAS Number |
ACGIH-TLV |
OSHA-PEL |
STEL |
|
Hydrocarbon and Oxygenated Solvents |
N/A |
25 ppm |
25 ppm |
N/A |
|
Acrylic Polymer |
N/A |
100 ppm |
200 ppm |
N/A |
|
Acetone |
67-64-1 |
750 ppm |
750 ppm |
1000 ppm |
SECTION 3 - HAZARD
IDENTIFICATION
Routes of Exposure: Excel-Coat Acrylic Lacquer Sealer (400 G/L VOC) can affect the body if it is inhaled, ingested, or comes in contact with the eyes and skin.
Summary of Acute Health Hazards
Ingestion: May cause irritation of esophagus and stomach.
Inhalation: May cause irritation of nose and throat.
Skin: May cause rash.
Eyes: Can cause irritation of the eye.
Signs and Symptoms of Exposure: Contact with skin or eyes may cause irritation. Breathing of th vapor may irritate the nose and throat.
Effects of Overexposure: May cause anesthesia, headache, nausea, or dizziness.
Emergency and First Aid Procedures:
Ingestion: Do no induce vomiting unless advised to do so by a physician. GET MEDICAL ATTENTION IMMEDIATELY.
Inhalation: Remove victim to fresh air and administer artificial respiration if required. GET MEDICAL ATTENTION, if needed.
Skin: Flush skin with plenty of water. If rash develops, get medical attention.
Eyes: Immediately flush with plenty of water for at least 15 minutes. GET MEDICAL ATTENTION, if discomfort persists.
Medical Conditions Generally Aggravated by Exposure: N/A
SECTION 4 - FIRST AID
MEASURES
Ingestion: Do not induce vomiting unless advised to do so by a physician. GET MEDICAL ATTENTION IMMEDIATELY.
Inhalation: Remove victim to fresh air and administer artificial respiration if required. GET MEDICAL ATTENTION, if needed.
Skin: Flush skin with plenty of water. If rash develops, get medical attention.
Eyes: Immediately flush with plenty of water for a least 15 minutes. GET MEDICAL ATTENTION, if discomfort persists.
Section
5 - FIRE FIGHTING MEASURES
Flash Point: 78° F - TCC Auto-ignition Temperature: 450° F
Lower Explosive Limit: 0.9% by volume in air Explosive Limit: 6.0% by volume in air
Unusual Fire and Explosion Hazards: Handle as an extremely flammable material. Vapors may form an explosive mixture with air between the upper and lower explosive limits.
Cont. Section 5 - Fire Fighting Measures
Extinguishing Media: Us foam, carbon dioxide or dry chemical. Use of water may cause fire to spread due to components that float on water. Acetone/water solutions have flash points when the acetone concentration I greater than 8% (by weight). The fire point, which is the percent by weight when a solution sustains a flame, is higher than that.
Special Firefighting Procedures: Wear self-contained breathing apparatus (pressures-demand, MSHA/NIOSH -approved or equivalent) and full protective gear.
SECTION 6 - ACCIDENTAL
RELEASE MEASURES
Eliminate all sources of ignition. Provide adequate ventilation. Flush wit water to a tank or an open well-ventilated area. Absorb or remove to a container and dispose of properly in conformance with local regulations.
SECTION 7 - HANDLING
AND STORAGE
CAUTION: EXTREMELY FLAMMABLE! Keep away from heat, sparks, and open flame. Keep container closed. Use with adequate ventilation.
SECTION
8 - EXPOSURE CONTROLS/PERSONAL PROTECTION
Respiratory Protection: All-purpose canister mask of air-supplied mask if the TLV is exceeded. Only MSHA or NIOSH approved respirators should be used .
Ventilation: Local is preferable, but mechanical is acceptable.
Protective Clothing: Protective gloves are advisable, and safety goggles or a face shield should be used.
Other Protective Clothing or Equipment: An eye wash and a safety shower should be available.
Work/Hygienic Practices: Employees who handle this product should wash their hands thoroughly before eating, drinking, smoking, or using toilet facilities.
SECTION
9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Liquid pH: N/A
Melting Point/Range: 0° F Boiling Point/Range: 240° F @ 760 mm. Hg
Appearance/Color/Odor: N/A Vapor Pressure (mmHG): N/A
Solubility in Water: N/A Molecular Weight: N/A
Specific Gravity (Water = 1): 0.96 % Volatiles: 72.6 by volume
Vapor Density (Air = 1): N/A How to detect this compound: N/A
SECTION
10 - STABILITY AND REACTIVITY
Stability: Stable Hazardous Polymerization: Will not occur
Conditions to Avoid: Heat or Flames
Material to Avoid: Strong alkalies or strong oxidizers. This sealer may dissolve some plastics, rubber materials or coating.
Hazardous Decomposition Products: From thermal decomposition, oxides of carbon and acrylic monomer vapors. Gases containing chlorine and/or fluorine may be produced.
SECTION
11 - TOXICOLOGICAL INFORMATION
N/A
SECTION
12 - ECOLOGICAL INFORMATION
N/A
SECTION
13 - DISPOSAL CONSIDERATION
Dispose of in accordance with applicable local, county, state and federal regualtions
SECTION
14 - TRANSPORT INFORMATION
DOT Proper Shipping Name: Paint
DOT Hazard Class/ID No: 3, UN1263, II
SECTION
15 - REGULATORY INFORMATION
Reportable Quantity: N/A
NFPA Rating: Health - 2; Fire - 3; Reactivity - 1
0=Insignificant 1=slight 2=Moderate 3-High 4-Extrem
Carinogenicity List: No NTP: No IARC Monograph: No OSHA Regulated: Yes
SECTION
16 - OTHER INFORMATION
Synonyms/Common Names: Sealer
Chemical Family/Type: Paint
IMPORTANT! Read this MSDS before use or disposal of this product. Pass along the information to employees and any other persons who could be exposed to the product to be sure that they are aware of the information before use or other exposure. This MSDS has been prepared according to the OSHA Hazard Communications Standard (29 CFR 1910.1200). The MSDS information is based on sources believed to be reliable. However, since data, safety standards, and government regulations are subject to change and the conditions of handling and use, or misuse are beyond our control. Excellent Coatings, Inc. makes no warranty, either expressed or implied, with respect to the completeness or continuing accuracy of the information contained herein and disclaims all liability for reliance thereon. Also, additional information may be necessary or helpful for specific conditions and circumstance of use. It is the user's responsibility to determine the suitability of this product and to evaluate risks prior to use, and them to exercise appropriate precautions for protection of employees and others.